TRF Forums
http://www.trf.org.uk/forum/

Heated grips.
http://www.trf.org.uk/forum/viewtopic.php?f=37&t=23216
Page 1 of 1

Author:  FBJ [ Sun Jan 22, 2017 2:56 pm ]
Post subject:  Heated grips.

Hi folks. Went laning this morning on my little CRF250L. It was -5degC. I need heated grips :-)

What do you guys recommend? Make ? Cost? Where to wire them?

Cheers John

Author:  Jer [ Tue Jan 24, 2017 6:43 pm ]
Post subject:  Re: Heated grips.

I fitted Symtec heated grips, wire straight off battery via an inline fuse.
They come with an on/off switch etc. Great bit of kit.

Author:  davidscott [ Tue Jan 24, 2017 6:44 pm ]
Post subject:  Re: Heated grips.

Yup. Symtec.
The backs of you hands will still get a bit cold but overall much much more tolerable.

Author:  FBJ [ Tue Jan 24, 2017 7:05 pm ]
Post subject:  Re: Heated grips.

They have arrived already

Author:  davidscott [ Tue Jan 24, 2017 8:05 pm ]
Post subject:  Re: Heated grips.

:D

Author:  Hugh Cleary [ Tue Jan 24, 2017 10:14 pm ]
Post subject:  Re: Heated grips.

Greetings,

Don't know if this schematic diagram might be of any assistance to you;

Attachment:
Basic heater circuit (Small).jpg
Basic heater circuit (Small).jpg [ 38.91 KiB | Viewed 9005 times ]


It is basically how I wired my heated grips, taking the ignition controlled feed from the pilot light circuit which is only live when the ignition is on. The system effectively shuts down automatically when the ignition is switched off and therefore the heaters should not drain the battery when the bike is parked irrespective of the switch control position.

TTFN

Hugh.

Author:  FBJ [ Tue Jan 24, 2017 10:38 pm ]
Post subject:  Re: Heated grips.

Come up trumps again Hugh. Your a top man. Thanks mate.

Page 1 of 1 All times are UTC [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/