TRF Forums

It is currently Thu Oct 10, 2024 6:05 pm

All times are UTC [ DST ]




Forum locked This topic is locked, you cannot edit posts or make further replies.  [ 4 posts ] 
Author Message
 Post subject: Decat system
PostPosted: Thu Jan 19, 2017 9:54 pm 
Offline
80 cc

Joined: Fri Aug 12, 2016 7:36 pm
Posts: 83
Can anyone recommend anyone to do a remap on a Ktm 690 duke
In the Manchester area!


Top
 Profile  
 
 Post subject: Re: Decat system
PostPosted: Sat Jan 21, 2017 9:59 pm 
Offline
80 cc

Joined: Fri Aug 12, 2016 7:36 pm
Posts: 83
The bike is running lean with the new pipe,I've been told to get a power commander to sort the problem.
Anyone had similar problems?


Top
 Profile  
 
 Post subject: Re: Decat system
PostPosted: Tue Sep 26, 2017 2:06 pm 
Offline
80 cc

Joined: Thu Feb 12, 2015 8:15 pm
Posts: 78
Location: Over by there
ifferent Bike (BMW 450), but I have just ordered a power commander and an autotune module to solve lean running especially on the low end, bloody lots of dosh compared to just fiddling with jets and needles in the good old days eh.

Unfortunately I won't get it for a fortnight so can't give my opinion yet but reports from others are positive, from what I have read they are probably the easiest method of mapping the ecu yourself if you don't want to take it to a tuner and have them dyno it and make you a custom map.

Another alternative worth considering is TuneECU http://www.tuneecu.com/ , which has some good reports from users and is much cheaper (basicly you just need the right lead made up and install the software), but the website is a bit technical and hard to understand, might suit you if you are a tinkerer
Good luck

_________________
Careful Now


Top
 Profile  
 
 Post subject: Re: Decat system
PostPosted: Tue Sep 26, 2017 5:57 pm 
Offline
80 cc

Joined: Sun Aug 27, 2017 8:07 am
Posts: 30
Location: Windsor, Berkshire
You don't necessarily NEED a power commander. Depending on the year of your bike and how comfortable you are with computers, you can self-load the proper map using www.tuneecu.com and the correct cable. For example, Ktm has an ECU map that is designed for customers who buy the power parts tuning kit stage 1 or 2 for your bike and the tuneECU site has those maps plus other custom maps created by other tuneECU users. Go to the tuneECU site and read through it then decide if loading a new map is something you can do (it's quite easy actually and I'm a Luddite)

_________________
KTM 950 Super Enduro: : It's the bike that made the Kessel Run in less than twelve parsecs
TRF; Loddon Vale
Www.tripleclampmoto.com


Top
 Profile  
 
Display posts from previous:  Sort by  
Forum locked This topic is locked, you cannot edit posts or make further replies.  [ 4 posts ] 

All times are UTC [ DST ]


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!