Hi guys , if it was like mine on my 400 ktm it just kept laying further and further over , at first i thaught it was the bracket that was bending but on closer inspection part of the bracket were it ataches to the lower frame cross member had torn allowing the lean .The other thing is the side stand mounting also attaches the chain guide over the front of the swinging arm so have a good look at that as well if yours has developed the lean . My pivot bolt has also snapped as well but that is not so much of a big deal ,at least the leg is still in one piece .
I lead most of the rides my way on so i can pick and choose the gates i can open or close dependant on a suitable leaning spot for the bike ,I have been getting away with it for years .
Might be interested to know if the ones that clamp onto the swinging arm actually work out in the field or are only suitable to prop the bike up for a quick wash of etc .
when i am feeling brave i will braze mine on properly ,but too many trails to do at the moment .Good luck
Julian East Yorks TRF