TRF Forums https://www.trf.org.uk/forum/ |
|
Bar Risers - 22mm bars? https://www.trf.org.uk/forum/viewtopic.php?f=36&t=20742 |
Page 1 of 1 |
Author: | johnnyboxer [ Sun Dec 06, 2015 11:32 pm ] |
Post subject: | Bar Risers - 22mm bars? |
Any recommendations? Bars on one of my bikes are too low - so need to raise them Are bar risers ok, which ones? Or just get some higher Renthals? |
Author: | KentWR [ Sun Dec 06, 2015 11:46 pm ] |
Post subject: | Re: Bar Risers - 22mm bars? |
I have got those high bend renthals, bought them for leisure trail. With these risers also which I can highly recommend as being excellent. Get the 30mm height I would much better for standing up http://www.ebay.co.uk/itm/291272311479?ru=http%3A%2F%2Fwww.ebay.co.uk%2Fsch%2Fi.html%3F_from%3DR40%26_sacat%3D0%26_nkw%3D291272311479%26_rdc%3D1 Bar risers change the bike completely, nobody wants to stand up and be hunched over that's horrible,how tall are you? |
Author: | Joel [ Mon Dec 07, 2015 1:13 am ] |
Post subject: | Re: Bar Risers - 22mm bars? |
Yup, I just got some RC ( Ricky Carmichael)high bend fat bars made by JAX metals ?(Taiwan) cheap at £25 but seemed worth a punt... I run these with 30mm risers, as well. I am 6'2 but the risers alone were not doing it... Much better now. |
Author: | johnnyboxer [ Mon Dec 07, 2015 8:15 am ] |
Post subject: | Re: Bar Risers - 22mm bars? |
KentWR wrote: I have got those high bend renthals, bought them for leisure trail. With these risers also which I can highly recommend as being excellent. Get the 30mm height I would much better for standing up http://www.ebay.co.uk/itm/291272311479?ru=http%3A%2F%2Fwww.ebay.co.uk%2Fsch%2Fi.html%3F_from%3DR40%26_sacat%3D0%26_nkw%3D291272311479%26_rdc%3D1 Bar risers change the bike completely, nobody wants to stand up and be hunched over that's horrible,how tall are you? 6'2 |
Author: | KentWR [ Mon Dec 07, 2015 8:59 am ] |
Post subject: | Re: Bar Risers - 22mm bars? |
Yeah i would get what I said then mate.. Bar risers won't do it I would go with both.. If your over 6ft. |
Author: | johnnyboxer [ Mon Dec 07, 2015 11:25 am ] |
Post subject: | Re: Bar Risers - 22mm bars? |
Thanks for the help and links, did you get that KTM 250/350? |
Author: | KentWR [ Mon Dec 07, 2015 2:47 pm ] |
Post subject: | Re: Bar Risers - 22mm bars? |
Na, well I PM him. No reply. I'd buy it. But dont really need it I was just going to do it up and keep it in the garage. If someone else wants it fill ya boots. |
Author: | richgilb [ Tue Dec 08, 2015 12:28 am ] |
Post subject: | Bar Risers - 22mm bars? |
I need both on some bikes and I am 6' 2" also. Gas gas and Ktm for example. But I just need one or the other on huskies. Sent from my iPhone using Tapatalk |
Page 1 of 1 | All times are UTC [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |