| TRF Forums https://www.trf.org.uk/forum/ |
|
| drz400....im at my wits end https://www.trf.org.uk/forum/viewtopic.php?f=35&t=23148 |
Page 3 of 3 |
| Author: | bluezie [ Mon Jan 30, 2017 10:55 am ] |
| Post subject: | Re: drz400....im at my wits end |
Cams can only be 180 degrees out if the ignition firing point is derived from the camshaft, but this is probably impossible to do, as the trigger device is most likely keyed to the camshaft. Virtually all single cylinder engines have the ignition derived from the crankshaft, so have an extra 'wasted spark' at the end of the exhaust stroke, which effectively becomes the ignition spark if the cams are 180 degrees out. |
|
| Author: | Nitew4tcher [ Thu Feb 09, 2017 9:33 pm ] |
| Post subject: | Re: drz400....im at my wits end |
bluezie wrote: Cams can only be 180 degrees out if the ignition firing point is derived from the camshaft, but this is probably impossible to do, as the trigger device is most likely keyed to the camshaft. Virtually all single cylinder engines have the ignition derived from the crankshaft, so have an extra 'wasted spark' at the end of the exhaust stroke, which effectively becomes the ignition spark if the cams are 180 degrees out. thankyou all for your words. ive exhausted all my knowledge and even a pro mechanic is stumped I have bit the bullet and bought another engine. fed up with it sat in the garage..for £300 on a engine theres more fun to be had riding than getting stressed with it Dan |
|
| Author: | smokinrider [ Thu Feb 09, 2017 10:26 pm ] |
| Post subject: | Re: drz400....im at my wits end |
Give you £50 for the knackerrd one. Sent from my iPhone using Tapatalk |
|
| Author: | KentWR [ Mon Feb 20, 2017 10:58 am ] |
| Post subject: | Re: drz400....im at my wits end |
How much do you want for it as is? |
|
| Page 3 of 3 | All times are UTC [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|