TRF Forums https://www.trf.org.uk/forum/ |
|
690 enduro Tubluss https://www.trf.org.uk/forum/viewtopic.php?f=109&t=23985 |
Page 2 of 2 |
Author: | 1200RT [ Thu Sep 14, 2017 1:01 pm ] |
Post subject: | Re: 690 enduro Tubluss |
I've fitted several sets of Tubliss, and I run them on my 690 and enduro bike. Running on the rear of a 690, you need a minimum tyre wall thickness of 7mm. The C02 has a very thin wall yet it is over 7mm and seals ok. Definitely torque the locknut up to 15Nm though. Sent from my GT-I9505 using Tapatalk |
Author: | 1200RT [ Thu Sep 14, 2017 1:03 pm ] |
Post subject: | Re: 690 enduro Tubluss |
Tubliss on a 690 rear rim. Inflated, but without tyre. Sent from my GT-I9505 using Tapatalk |
Author: | 1200RT [ Thu Sep 14, 2017 1:06 pm ] |
Post subject: | Re: 690 enduro Tubluss |
1200RT wrote: Tubliss on a 690 rear rim. Inflated, but without tyre. My only Tubliss "puncture". A snakebite to the front tyre during the Beacons Rally. Finished the lap on a flat; plugged and reinflate in minutes. Repairs have held up fine, with no air loss. (On my exc btw). Sent from my GT-I9505 using Tapatalk Sent from my GT-I9505 using Tapatalk |
Author: | ironandtri [ Thu Sep 14, 2017 10:34 pm ] |
Post subject: | Re: 690 enduro Tubluss |
Word is Andy that they could be looking at a wider section to be introduced think i read it on ADV |
Author: | ironandtri [ Mon Sep 25, 2017 9:03 am ] |
Post subject: | Re: 690 enduro Tubluss |
Ok one ripped c02 rear and on c02 still atached to the rim and got me back to the van . Tubliss Rocks |
Author: | Chris123321 [ Tue Sep 26, 2017 6:53 pm ] |
Post subject: | Re: 690 enduro Tubluss |
As has been said the tubliss can struggle to squize against the tyre to keep it in place. https://www.youtube.com/watch?v=_ITAh42QIa0 Here is a video of someone who says somewhere in the video if I remember correctly that he uses a cheap hard china rear tyre which had a bigger sidewall bead so the tubliss clamps it tight. Also has good opinion on where the 690/701 stands in the endure / trail riding world. |
Author: | ironandtri [ Wed Sep 27, 2017 6:09 pm ] |
Post subject: | Re: 690 enduro Tubluss |
Going back to my good old mitas e09 dakar run size 130/80/18 run at 15psi it has a thick as fcuk side wall. |
Page 2 of 2 | All times are UTC [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |