TRF Forums
https://www.trf.org.uk/forum/

690 enduro Tubluss
https://www.trf.org.uk/forum/viewtopic.php?f=109&t=23985
Page 2 of 2

Author:  1200RT [ Thu Sep 14, 2017 1:01 pm ]
Post subject:  Re: 690 enduro Tubluss

I've fitted several sets of Tubliss, and I run them on my 690 and enduro bike.
Running on the rear of a 690, you need a minimum tyre wall thickness of 7mm. The C02 has a very thin wall yet it is over 7mm and seals ok. Definitely torque the locknut up to 15Nm though.


Sent from my GT-I9505 using Tapatalk

Author:  1200RT [ Thu Sep 14, 2017 1:03 pm ]
Post subject:  Re: 690 enduro Tubluss

Tubliss on a 690 rear rim. Inflated, but without tyre.Image

Sent from my GT-I9505 using Tapatalk

Author:  1200RT [ Thu Sep 14, 2017 1:06 pm ]
Post subject:  Re: 690 enduro Tubluss

1200RT wrote:
Tubliss on a 690 rear rim. Inflated, but without tyre.Image

Sent from my GT-I9505 using Tapatalk
My only Tubliss "puncture". A snakebite to the front tyre during the Beacons Rally. Finished the lap on a flat; plugged and reinflate in minutes. Repairs have held up fine, with no air loss. (On my exc btw). Image

Sent from my GT-I9505 using Tapatalk

Author:  ironandtri [ Thu Sep 14, 2017 10:34 pm ]
Post subject:  Re: 690 enduro Tubluss

Word is Andy that they could be looking at a wider section to be introduced think i read it on ADV

Author:  ironandtri [ Mon Sep 25, 2017 9:03 am ]
Post subject:  Re: 690 enduro Tubluss

Ok one ripped c02 rear and on c02 still atached to the rim and got me back to the van .
Tubliss Rocks

Author:  Chris123321 [ Tue Sep 26, 2017 6:53 pm ]
Post subject:  Re: 690 enduro Tubluss

As has been said the tubliss can struggle to squize against the tyre to keep it in place.

https://www.youtube.com/watch?v=_ITAh42QIa0

Here is a video of someone who says somewhere in the video if I remember correctly that he uses a cheap hard china rear tyre which had a bigger sidewall bead so the tubliss clamps it tight.

Also has good opinion on where the 690/701 stands in the endure / trail riding world.

Author:  ironandtri [ Wed Sep 27, 2017 6:09 pm ]
Post subject:  Re: 690 enduro Tubluss

Going back to my good old mitas e09 dakar run size 130/80/18 run at 15psi it has a thick as fcuk side wall.

Page 2 of 2 All times are UTC [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/