TRF Forums
http://www.trf.org.uk/forum/

690 a jet wash issue
http://www.trf.org.uk/forum/viewtopic.php?f=109&t=22947
Page 3 of 3

Author:  davidscott [ Tue Dec 06, 2016 2:34 pm ]
Post subject:  Re: 690 a jet wash issue

None of them have been rideable though ;) :lol:

Author:  RobK [ Tue Dec 06, 2016 5:31 pm ]
Post subject:  Re: 690 a jet wash issue

davidscott wrote:
None of them have been rideable though ;) :lol:


Possibly - but the seats were not slippy............;0)

Author:  davidscott [ Tue Dec 06, 2016 6:17 pm ]
Post subject:  Re: 690 a jet wash issue

Ooooh! :lol:

Author:  lee m [ Wed Dec 07, 2016 2:26 pm ]
Post subject:  Re: 690 a jet wash issue

Try replacing the spark plug cap I’ve been told they deteriorate over time

Author:  ironandtri [ Thu Dec 15, 2016 11:33 am ]
Post subject:  Re: 690 a jet wash issue

Ha Joel you need to get with times Son and use smokeless coal in the old jalopy of yours

Author:  chrisu [ Wed Feb 22, 2017 10:22 am ]
Post subject:  Re: 690 a jet wash issue

I use contact cleaner on electrics not WD40. Also ACF50 you can buy in bottles with a small applicator bottle - aerosol cans are expensive by comparison. Just spray onto a rag and wipe on. You can also spray into hard to reach places and wipe off. I use it for my Zs when they sit in the garage when salt on the roads. Lasts for ages.

Author:  mike Irving [ Wed Feb 22, 2017 3:29 pm ]
Post subject:  Re: 690 a jet wash issue

had problems with the paint coming off but never electric.

even full emersion in one of Cornwells Finest and wettest ....took 7 oil changes but still started on the button.

i would say neglect, abuse and irregular washing rather than spending money and time on Spray or inner tubes. :lol:

Author:  akendall1966 [ Wed Feb 22, 2017 9:16 pm ]
Post subject:  Re: 690 a jet wash issue

Richard Simpson wrote:
Sounds like a nightmare...I'll stick with carbs for as long as possible!

I'd have thought WD40 would still be OK if sprayed outside the connectors.

Could you use dilectric grease or similar inside them, or would that be a problem.

Yes dielectric/silicone grease unplug pack with the grease and replug no place for water to get inside.

Sent from my Archos 70b Helium using Tapatalk

Page 3 of 3 All times are UTC [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/